Eames shell chairs: original, authorized reissue or replica?

Eames molded shell chairs have been made in fiberglass, then polypropylene, then fiberglass again, on dozens of base combinations, and they are copied in huge numbers. Telling a period chair from current authorized production or an unauthorized reproduction depends on the shell material, the base, the shock mounts and the marks underneath, read together. Here is what to look at, and what a photo can and cannot settle.

A short history: who made them, and when

The shell chair began as an entry for the Museum of Modern Art's International Competition for Low-Cost Furniture Design. The Eames Office describes that entry as one-piece shells, with and without arms, in stamped steel coated with neoprene. It took second place, and Herman Miller declined to pay for a steel stamping press, so Charles and Ray Eames turned to fiberglass-reinforced plastic.

Production partners were Zenith Plastics of Gardena, California, which had made fiberglass radomes for military aircraft. The Eames Office records that the production contract was signed in November 1949 and the chairs were first shown at the Chicago Merchandise Mart in January 1950. Herman Miller calls it the first mass-produced plastic chair.

Vitra describes the range as a family from the start: an armchair shell and a side chair shell combined with a choice of bases. The first year's colors were greige, elephant hide grey and parchment, according to the Eames Office, and the range later grew to as many as 30 colors. Herman Miller sold the chairs in North America. In Europe and the Middle East, Vitra has made and distributed Eames designs since the 1950s, and has held the rights for that territory since 1984.

Fiberglass, polypropylene and fiberglass again: what "original" means

Herman Miller stopped making fiberglass shells over environmental concerns. A 2013 Herman Miller announcement dates the end of production to 1989, while its own later history says production had ceased by the early 1990s. Herman Miller then introduced the design in recyclable polypropylene, dated 2000 in one Herman Miller text and 2001 in another.

Herman Miller brought fiberglass back in 2013, using a new monomer-free resin and a dry binder process, and describes making the shells at a fiberglass facility in Ashtabula, Ohio. Vitra followed a similar path. It relaunched the chairs in polypropylene in 1998 and reintroduced fiberglass 20 years later, in 2018. Since January 2024, Vitra's Eames Plastic Chairs have used recycled post-consumer plastic.

So there are four kinds of chair you may be holding. A vintage fiberglass chair made by or for Herman Miller or Vitra. A current fiberglass chair from either company. A current polypropylene chair from either company. And an unauthorized reproduction. The first three are all genuine. Current production is not a fake, and a polypropylene shell from Herman Miller or Vitra is fully authorized.

What a polypropylene shell cannot be is a vintage original from the 1950s to the 1980s. If a polypropylene chair is described as period production, the description is wrong even if the chair itself is authorized.

Model names, bases and shock mounts

The model names are codes. In the naming Vitra uses, the first letter gives the height (D for dining, L for lounge, R for rocker), the second the shell (S for side, A for armchair) and the last the base. So RAR is a rocking armchair on a rod base and LAR a lounge-height armchair on a rod base. Retailer guides give W as the wood dowel base and X as the X-base, so DSW is a dining-height side chair on wooden legs and DAW the armchair version.

Bases are where many chairs stop being all-original. Vitra lists the early bases as a rocker with a rod base on wooden runners and a four-legged tubular steel base, followed by cast aluminum pedestals, swivel, wire, wood dowel, stacking and beam bases. Because shells and bases unbolt, a genuine vintage shell is often found on a later or unauthorized base.

The dowel base is the clearest example. A specialist dealer reports that the original wooden dowel bases were made only into the early 1950s, and that the bases on Herman Miller's reissued dowel chairs have steel rods inside the legs, which makes them heavy. A 1960s shell on a dowel base is therefore likely to be a later pairing. Current Vitra rockers have maple runners, so runner wood is not a reliable age clue on its own.

The shell connects to the base through rubber shock mounts bonded to the underside, an Eames technique first used on the molded plywood chairs. On a vintage chair, look at whether the mounts appear original, reglued or replaced, and whether any have pulled away from the shell. Repairs are not a sign of a fake, but they affect value and condition.

The shell: material, surface and edge

Fiberglass and polypropylene look different up close. Fiberglass shows fine strands and slight surface variation in the color. Polypropylene is smooth, even and more uniform. Photograph the shell in raking light to show the surface clearly.

Visible fibers do not prove age. Herman Miller says its current fiberglass shells have the same surface variation and fiberglass striations that collectors look for, and may show tiny surface cavities, lighter or darker points and faint circular shadows where the base attaches. Vitra notes that its current fiberglass shells are slightly transparent in some colors, as the earliest ones were. Age has to come from wear, marks and construction together.

The earliest Zenith-made shells have what collectors call a rope edge, a pronounced rolled rim. Wright notes that this detail was discontinued after the first year of production. A rope edge is rare and valuable, which also makes it worth checking with particular care.

Look at the condition of the edges and the underside. A shell that has been in use for decades usually shows some wear, scratches or fading consistent with its claimed history. A shell described as very old that looks entirely new deserves questions, though careful storage does happen.

Labels, marks and paperwork, and their limits

Early shells carried a decal label naming both companies. Wright catalogs record wording such as 'Herman Miller Furniture Company Zeeland, Michigan Designed by Charles Eames The Shell Is Moulded By Zenith Plastics Co. Gardena California', and one pair of 1950 chairs with a variant naming Pasadena. One early example also carried a model mark, recorded as 'MAX 428'.

The company name helps with dating. The Art Institute of Chicago notes that Herman Miller Furniture Co. became Herman Miller Inc. in 1960, so the older name points to earlier production. Later vintage shells are often reported to carry a Herman Miller mark molded into the underside, and chairs sold in Europe may carry Vitra marks instead. Herman Miller says its current fiberglass chairs come with an authenticity certificate.

Marks have limits. Paper and decal labels wear off or are removed, and a chair with no visible mark is not automatically a copy. A mark that matches the rest of the chair supports it. A mark on a shell whose material, base and mounts do not fit the claimed period proves very little.

Common signs of an unauthorized reproduction

A specialist dealer describes the dowel base as the most copied base today, and notes that many copied dowel bases are lightweight and some use hex-key bolts. Other differences to look for include a shell whose curves or depth look slightly off, edges that look thick or blunt, no maker's mark anywhere, and a plastic shell sold as vintage fiberglass.

Look at how the base attaches. A reproduction may join base and shell differently from the authorized chair of the same type, for example without visible rubber mounts. The attachment method varies by maker and period, so compare with a documented example from the same maker and decade rather than with a general idea of what a shell chair looks like.

No single feature proves a chair authentic or unauthorized. Several small differences together usually tell the story, and some chairs, especially lone shells on replaced bases, will remain inconclusive from photos alone.

What to photograph for a preliminary check

Good photos let us compare the chair against documented examples. Use daylight, avoid heavy filters, and turn the chair over on a soft surface for the underside shots. A preliminary opinion from photos can point strongly one way, but it is not a substitute for handling the chair, and some cases will stay inconclusive.

  • The whole chair from the front, side and back, at roughly seat height.
  • The full underside of the shell with the base attached, showing every label and mark.
  • Close-ups of each label or molded mark, sharp enough to read the wording.
  • The shell surface in raking side light, close enough to show fibers or a smooth finish.
  • The front and side edges of the shell, including the edge profile.
  • Each shock mount, close up, showing how it meets the shell.
  • The base on its own, including welds, feet or glides and any maker stamps.
  • For dowel or rocker bases, the wooden legs or runners and the fixings that join them to the metal.
  • Any cracks, repairs or replaced parts, with a note of what you know about them.

Frequently asked questions

How do I know if my Eames fiberglass chair is vintage?

Look for fiberglass rather than polypropylene, wear consistent with age, original rubber shock mounts and period marks such as an early Herman Miller and Zenith label or a later Herman Miller mark. Current Herman Miller and Vitra fiberglass shells also show visible fibers, so no single feature settles the age.

What does DSW stand for on an Eames chair?

Dining-height Side chair on a Wood base. The same pattern runs through the range: DAW is the armchair on wooden legs, DSR the side chair on a rod base and RAR the rocking armchair on a rod base.

Is a polypropylene Eames chair fake?

Not necessarily. Vitra has made the chairs in polypropylene since 1998 and Herman Miller since around 2000 to 2001. A polypropylene shell from either company is authorized current production. It cannot, however, be a vintage chair from before that time.

When did Herman Miller stop making fiberglass shell chairs?

Herman Miller dates the end of fiberglass production to 1989 in one account and to the early 1990s in another. It reintroduced fiberglass shells in 2013 using a new, cleaner production process.

What is a rope edge Eames chair?

An early fiberglass shell made by Zenith Plastics with a pronounced rolled rim. Wright notes that the rope edge was discontinued after the first year of production, which makes these chairs scarce and frequently checked.

Are Vitra Eames plastic chairs authentic?

Yes. Vitra is the authorized manufacturer of Eames designs for Europe and the Middle East. Its Eames Plastic Chairs and Eames Fiberglass Chairs are genuine current production, not replicas.

Not sure about your piece?

Send us your photos for a preliminary opinion, from EUR 79. We reply by email with a quote before any work starts.

Sources

  1. Eames Office: Molded Shell Chairs
  2. Herman Miller: Shell Shorts (history of the Eames shell chair)
  3. Herman Miller: Eames Molded Fiberglass Chairs
  4. Herman Miller: Eames Molded Fiberglass Side Chair (store listing)
  5. Dexigner: Herman Miller Reintroduces Eames Molded Plastic Arm and Side Chair in Sustainable Fiberglass
  6. Vitra: The Story of an Icon
  7. Vitra: About the partnership between Eames and Vitra
  8. Vitra: Herman Miller and Vitra
  9. Vitra: Eames Shell Chairs factbook (2023, retailer-hosted copy)
  10. Wright: Charles and Ray Eames DAXs, pair, 1950 (lot 159, September 2015)
  11. Wright: Charles and Ray Eames MAX, 1950 (lot 170, September 2015)
  12. Wright: Charles and Ray Eames DAR, 1951 (lot 111, October 2008)
  13. Art Institute of Chicago: Rocking Armchair (model RAR)
  14. smow Journal: DSR, RAR, DAW etc. The plastic chairs of Charles and Ray Eames
  15. Eames.com (specialist vintage dealer): Eames DSW side chair