Eames Lounge Chair: original, authorized reissue or replica?

The Eames Lounge Chair and Ottoman has been made without a break since 1956, and it is also one of the most copied pieces of furniture in the world. Telling a period example from current authorized production or an unauthorized reproduction means reading the shells, base, hardware, cushions and labels together. Here is what to look at, and what a photo can and cannot settle.

A short history: who made it, and when

Charles and Ray Eames designed the lounge chair (model 670) and its ottoman (model 671) for Herman Miller, which introduced the pair in 1956. Herman Miller says the set has been in continuous production ever since. The Eames Office recounts that Charles and Ray presented it themselves on national television, on Arlene Francis's Home show.

The construction is simple to describe. The Eames Office calls it three molded plywood shells with tailored leather cushions, mounted on a cast aluminum base that pivots. The ottoman has its own shell. The two back panels are identical, and the chair seat and ottoman seat share one form.

Two companies are authorized to make it. Herman Miller produces the chair for North America and markets outside Vitra's territory, and its buying guide says the chair is assembled by hand in Michigan. Vitra says it became Herman Miller's licensee for continental Europe in 1956, and that when that partnership ended in 1984, the rights to the Eames designs for Europe and the Middle East were assigned to Vitra. The Vitra Design Museum holds a lounge chair and ottoman produced in Basel in 1957/58 under the Contura (Vitra) name.

What "original" means for this chair

Because the chair has never gone out of production, there is no single reissue date to work from. A vintage example is one made decades ago by Herman Miller or by Vitra. Current production is the chair either company makes today. Both are authorized and both are genuine. A new chair is not a fake simply because it is new.

An unauthorized reproduction is any chair in this form made without a license from Herman Miller or Vitra. Many are sold openly under descriptive names. The better ones look convincing in a single photo, which is why a check looks at several features rather than one.

There is also a middle ground. Many authentic vintage chairs have had cushions reupholstered, shock mounts repaired or an ottoman paired from another set. That does not make the chair a reproduction, but it does change what can be said about it and usually its value.

The shells: veneer, plies and grain

The face veneer is the first dating clue. The original veneer was Brazilian rosewood. Galerie magazine reports that Herman Miller stopped using it in 1990, while one long-running specialist dealer gives 1991, so treat the cutoff as about 1990 to 1991. A genuine Herman Miller chair in Brazilian rosewood is therefore most likely from before the early 1990s.

Later veneers include cherry, walnut, white ash, white oak, black finishes and Santos palisander. Herman Miller notes that its oiled walnut and palisander finishes closely resemble the original rosewood. A dark, figured shell is not proof of age on its own, because current production can look similar. The grain pattern and the way the wood has aged need to be read together.

Look at the exposed edges of the shells and count the plies. Herman Miller describes its current shells as seven-ply. Early shells are widely reported to have five plies, but sources date the change differently, from the 1970s to the early 1990s. Use ply count to check consistency with the claimed era, not as a date in itself.

Check that the veneer matches across all shells. Be Original Americas, an industry group of design manufacturers, notes that the veneer on the shells is matched, cut from a single log. A chair with one shell that differs strongly in color or figure may have a replacement panel, which is worth knowing even when the rest is genuine.

Base, shock mounts, hardware and cushions

The chair sits on a five-pointed die-cast aluminum base with a built-in swivel, and the ottoman on a matching four-pointed base, according to the Eames Office. Wright auction catalogs describe vintage examples as enameled and brushed aluminum. The chair and ottoman feet should match each other.

The shells are joined to the aluminum arms and back braces through rubber shock mounts, which the Eames Office describes as a core Eames technique. Mounts that have failed are a common repair on old chairs. Look under the arms and behind the back for mounts that have been reglued, or for bolts driven through the shell from the outside, which a specialist dealer flags as a repair that reduces value.

Small hardware details are often used for dating, though they come mostly from specialist dealers rather than the manufacturer. The earliest chairs are reported to have three screws under each armrest and later chairs two, with the change placed around 1960. Early ottomans are reported to have push-on boot glides rather than screw-in feet. One dealer also reports that original chairs use imperial-thread bolts while many copies use metric or hex-key fittings.

Cushion fill changed over time. Galerie describes the original back cushions as feather and down over a foam rubber core, and later production moved to foam. The clips that hold the cushions to the shells also changed style over the decades, and sources disagree on the exact dates. Herman Miller describes the cushions as button-tufted, so a cushion with no buttons is a reason to look harder.

Labels, marks and paperwork, and their limits

Herman Miller states that new and vintage chairs it produced carry a medallion on the underside. In practice the wording and style vary by decade. Wright auction catalogs record chairs from around 1960 to 1964 with a circular metal label reading 'Designed by Charles Eames Herman Miller Zeeland, Mich.', sometimes alongside a decal or paper patent label. A set dated to around 1985 carried a 'Herman Miller' decal and stickers reading 'Herman Miller, Inc. Zeeland, Michigan 49464'.

The company name itself helps. The Art Institute of Chicago notes that Herman Miller Furniture Co. became Herman Miller Inc. in 1960, so a label using the older name points to earlier production. Recent chairs may also carry production-date stickers. A Vitra-made chair should carry Vitra's own marking, not a Herman Miller one.

Labels have real limits. They fall off, get painted over during refinishing, and can be moved. One specialist dealer reports seeing genuine Herman Miller labels taken from other pieces and fixed to copies. A label that fits the rest of the chair supports it. A label on a chair whose shells, base and hardware do not fit proves nothing.

Receipts, original delivery paperwork and certificates help, especially for recent chairs, but they are often lost. A missing certificate is common and says little either way.

Common signs of an unauthorized reproduction

Start with proportions. The Eames Office gives the classic chair as 32.75 inches wide and deep and 31.5 inches high, with a Tall version at 33.5 inches. Wright catalogs record vintage chairs at roughly 32 to 33 inches high and 33 to 34 inches wide, so allow for some variation and for how the measurement was taken. A chair well outside that range, or with a back that sits too upright or too reclined, needs a closer look.

Then look at the materials. Veneer that looks printed or perfectly uniform, a five-ply edge on a walnut or palisander shell, a base casting that looks thin or rough, cushions with no tufting or stiff, shiny upholstery, and metric or hex-key fasteners are all common on reproductions. None of these alone proves a chair is unauthorized. Several together make it very likely.

Watch for combinations that do not fit any real production period, such as an early-style label on a chair with late-style hardware, or rosewood described as Brazilian on a chair with every other feature of recent manufacture. Contradictions are often more telling than any single detail.

What to photograph for a preliminary check

Good photos let us compare the chair against documented examples. Use daylight, avoid heavy filters, and photograph the chair and ottoman separately. A preliminary opinion from photos can point strongly one way, but it cannot replace an in-person inspection, and some chairs will remain inconclusive.

  • The whole chair and ottoman from the front, side and back, at roughly seat height.
  • The underside of the chair seat and the ottoman, showing every label, medallion and sticker.
  • Close-ups of each label, sharp enough to read the wording.
  • An exposed shell edge, close enough to count the plies.
  • The veneer on the back of the outer shells, to show grain and color across all panels.
  • The base from above and below, including one foot or glide on the chair and one on the ottoman.
  • The underside of an armrest, showing the screws or bolts.
  • The shock mounts and back braces behind the backrest, with any visible repairs.
  • A cushion lifted away to show the clips, the cushion back and any markings.
  • A tape measure against the overall height and width of the chair.

Frequently asked questions

How can I tell if my Eames Lounge Chair is real?

Check several features together: a Herman Miller or Vitra label on the underside, veneer and ply count consistent with the claimed era, a five-point die-cast aluminum swivel base, rubber shock mounts, button-tufted cushions and proportions close to the published dimensions. No single feature proves authenticity, and labels can be missing or moved.

When did Herman Miller stop using Brazilian rosewood on the Eames Lounge Chair?

Around 1990 to 1991. Galerie magazine gives 1990 and some specialist dealers give 1991. Later chairs use veneers such as cherry, walnut, ash, oak and Santos palisander.

Is a Vitra Eames Lounge Chair an original?

Yes. Vitra is the authorized manufacturer for Europe and the Middle East, and has made Eames designs under license since the 1950s. A Vitra chair is genuine current or vintage production, not a replica.

What do the numbers 670 and 671 mean?

They are the original Herman Miller model numbers: 670 is the lounge chair and 671 is the ottoman. The numbers alone do not indicate age or authenticity, because they are also widely used to describe reproductions.

Does a missing label mean my Eames chair is a replica?

No. Labels fall off, get removed during refinishing or are lost over decades of use. A chair without a label has to be judged on its construction, materials and hardware instead, and some cases will remain inconclusive.

How many plies should an Eames Lounge Chair shell have?

Herman Miller describes current shells as seven-ply. Early shells are reported to have five plies, but sources date the change differently, so ply count is a consistency check rather than a precise date.

Not sure about your piece?

Send us your photos for a preliminary opinion, from EUR 79. We reply by email with a quote before any work starts.

Sources

  1. Herman Miller: Eames Lounge Chair and Ottoman
  2. Herman Miller: A Definitive Guide to the Eames Lounge Chair
  3. Eames Office: Lounge Chair and Ottoman
  4. Eames Office: Eames Lounge Chair and Ottoman product specifications
  5. Vitra: Herman Miller and Vitra
  6. Vitra Design Museum: Lounge Chair No. 670 and Ottoman No. 671
  7. Galerie: How the Eames Lounge Chair Became an Icon of American Design
  8. Wright: Charles and Ray Eames 670 lounge chair and 671 ottoman, c. 1964 (lot 170, October 2023)
  9. Wright: Charles and Ray Eames 670 lounge chair and 671 ottoman, c. 1985 (lot 406, December 2023)
  10. Wright: Charles and Ray Eames 670 lounge chair and 671 ottoman, c. 1960 (lot 314, July 2024)
  11. Wright: Charles and Ray Eames 670 lounge chair and 671 ottoman, c. 1960 (lot 112, January 2025)
  12. Art Institute of Chicago: Rocking Armchair (model RAR), note on the Herman Miller name change
  13. Be Original Americas: How to Identify an Original: Herman Miller
  14. Eames.com (specialist vintage dealer): Eames Lounge Chair and Ottoman generations